Elegancespark Innovations Private Limited

Product OverviewThe HIP4082IBZ is a medium frequency, medium voltage half-bridge N-channel MOSFET Driver IC. Specifically targeted for PWM motor control and UPS applications, bridge based design is made simple and flexible with the half-bridge driver. With operation up to 80V, the device is best suited to applications of moderate power levels. It has a flexible input protocol for driving every possible switch combination except those which would cause a shoot-through condition. It reduced drive current allows smaller packaging and it has a much wider range of programmable dead times (0.1 to 4.5ms) making it ideal for switching frequencies up to 200kHz. It does not contain an internal charge pump, but does incorporate non-latching level-shift translation control of the upper drive circuits.
• Independently drives 4 N-channel FET in full-bridge configurations
• 95VDC Bootstrap supply maximum voltage
• Drives 1000pF load at 1MHz in free air at 50°C
• User-programmable dead time
• DIS (disable) overrides input control and refreshes bootstrap capacitor when pulled low
• Shoot-through protection
• Under voltage protection
Applications

Power Management, Automotive, Motor Drive & Control

Additional Information:

• Item Code: 100000
• Production Capacity: 10000
• Delivery Time: 1-2 WEEKS
• Packaging Details: SMD

Additional Information:

• Production Capacity: 10000
• Delivery Time: 2-3 Days

The QW3862 parts manufactured by QW are available for purchase at Jotrin Electronics. Here you can find various types and values ​​of electronic parts from the world's leading manufacturers. The QW3862 components of Jotrin Electronics are carefully chosen, undergo stringent quality control, and are successfully meet all required standards.

The QW24T25033-NGB0G is DC/DC CONVERT, that includes Isolated Product, they are designed to operate with a 1 Output Number of Outputs, Input Voltage is shown on datasheet note for use in a 18 V to 60 V, that offers Output Voltage Channel 1 features such as 3.3 V, Output Current Channel 1 is designed to work in 25 A, as well as the 2 kV Isolation Voltage, the device can also be used as 1/4 Brick Package Case Size.

QW152-MB8UM-BP-25 with user guide, that includes 0dB Test Frequency, they are designed to operate with a 1 RF Type, Packaging is shown on datasheet note for use in a Bulk, that offers P1dB features such as 157MHz, Noise Figure is designed to work in Whip, Straight, as well as the 152MHz ~ 162MHz Gain, the device can also be used as VHF (f Frequency.

QW2405-12 with circuit diagram manufactured by COSEL. The QW2405-12 is available in MODULE Package, is part of the Module.

The QW24T25033-NGA0G is Isolated DC/DC Converters 18-60Vin 3.3Vout 25A Quarter Brick.188pl manufactured by Bel Power. The QW24T25033-NGA0G is available in Quarter Brick Package, is part of the DC DC Converters, , and with support for Isolated DC/DC Converters 18-60Vin 3.3Vout 25A Quarter Brick.188pl.

 

Additional Information:

• Production Capacity: 1000

Additional Information:

• Production Capacity: 10000
• Delivery Time: 2-3 days

Additional Information:

• Production Capacity: 100000

CategoryIntegrated Circuits (ICs)EmbeddedMicrocontrollersMfrSTMicroelectronicsSeriesSTM32C0PackagingTrayPart StatusActiveDigiKey ProgrammableNot VerifiedCore ProcessorARM® Cortex®-M0+Core Size32-BitSpeed48MHzConnectivityI2C, IrDA, LINbus, SPI, UART/USARTPeripheralsBrown-out Detect/Reset, POR, PWM, Temp Sensor, WDTNumber of I/O18Program Memory Size16KB (16K x 8)Program Memory TypeFLASHEEPROM Size-RAM Size12K x 8Voltage - Supply (Vcc/Vdd)2V ~ 3.6VData ConvertersA/D 15x12b SAROscillator TypeExternal, InternalOperating Temperature-40°C ~ 85°C (TA)Mounting TypeSurface MountSupplier Device Package20-TSSOPPackage / Case20-TSSOP (0.173", 4.40mm Width)

Additional Information:

• Production Capacity: 10000
• Delivery Time: 2-3 days

Product OverviewThe MAX8887EZK18+T is a low dropout, 300mA linear regulator in 5 pin TSOT-23 package. It operate from a 2.5V to 5.5V input and deliver up to 300mA continuous (500mA pulsed) current. The MAX8887 is optimized for low-noise operation. The regulator feature exceptionally low 100mV dropout at 200mA. This device is available with a preset output voltage of 1.8V. An internal PMOS pass transistor allows the low 55µA supply current to remain independent of load making this device ideal for portable battery powered equipment such as personal digital assistants (PDAs), cellular phones, cordless phones and notebook computers. Other features include a micropower shutdown mode, short circuit protection, thermal shutdown protection and an active-low open-drain POK output that indicates when the output is out of regulation.

• PSRR is 60dB at 1KHz
• Operating temperature range from -40°C to 85°C
• Foldback output current limit protection
• Shutdown supply current is 0.1µA
• No load supply current is 55µA

Applications

Power Management, Portable Devices

WarningsMarket demand for this product has caused an extension in leadtimes. Delivery dates may fluctuate. Product exempt from discounts.

Additional Information:

• Production Capacity: 1000000

Additional Information:

• Production Capacity: 10000
• Delivery Time: 2-3 days

Additional Information:

• Production Capacity: 10000
• Delivery Time: 2-3 days

Additional Information:

• Production Capacity: 25000

Additional Information:

• Production Capacity: 10000

Additional Information:

• Production Capacity: 100000
• Delivery Time: 2-3 Days

Additional Information:

• Production Capacity: 100000
• Delivery Time: 2-3 Days

Additional Information:

• Production Capacity: 10000